Aquatica TTL Strobe Controller Module for Ikelite Strobe
Part #: AQ-18955
Product Overview:
This product is deisgned to be used with Aquatica Housings to be fittered with Ikelite TTL Control which would allow user to control strobe output of DS Series strobes from the housing. The strobe controller gives you full controll while on TTL or in manual mode.
This could also be easily installed, without using any special tools. Pull out the connector on the housing after removing its retaining o-ring, clean and lubricate the sealing o-ring and push the TTL interface housing into position, reinstall the retaining o-ring in place
Weight:
1.00 LBS
Dimensions:
5.00
(in)
×
5.00
(in)
×
5.00
(in)
Free Worldwide Shipping:
No
Brand:
Aquatica
