Backscatter No Burp O-ring For TG Housings & M52 Wide Angle Lens
Burping the UWL-M52 lens underwater on your TG camera housing can be avoided with this O-ring kit. It removes the need to unthread your UWL-M52 lens underwater in order to "burp" the lens and enables you to pre-seal water from a rinse bucket. With a wet lens on your TG housing, you may also take split photos (over/under) thanks to this O-ring. Although our package includes five O-rings as a backup supply, you only need to install one.
The No Burp O-ring is purpose-built for underwater photographers who demand the best from their gear. It eliminates the need to constantly "burp" your lens underwater, allowing you to focus on capturing stunning images instead of fiddling with your equipment.
Compatible Housings and Lenses
This innovative O-ring is designed for use with TG series camera housings (like those for Olympus Tough cameras) and M52 wide-angle lenses, including popular models like the Backscatter M52 Wide Angle Lens and the UWL-M52.
Benefits of Using the No Burp O-ring
Okay, so it stops bubbles. But what's the big deal? Let's break down the real benefits of this clever little O-ring:
Eliminates Annoying Air Bubbles
Without having to unthread your UWL-M52 lens underwater to "burp" it, you can pre-seal water from a rinse bucket. Additionally, you may use a wet lens on your TG housing to take split photos (over/under) thanks to this O-ring. Although you only need to install one O-ring, our package comes with five extra for backup.
Simplifies Split Shots (Over/Under)
Want to capture those breathtaking half-in, half-out-of-the-water shots? The No Burp O-ring makes it a breeze! By pre-sealing your lens, you can easily achieve those captivating over/under images without worrying about bubbles ruining your composition.
Saves Time and Effort
Time is precious, especially when you're diving. The No Burp O-ring streamlines your underwater photography workflow. No more fumbling with your lens to release trapped air. Just attach your lens, and you're ready to shoot!
No-Burp O-rings Are Not Required & Not Compatible with Air Lens or QRS Mount System
How to use:
- Insert the no-burp O-ring on your housing threaded port
- Submerge bioth the housing and UWL-M52 lens in the rinse bucket
- Remove any potential bubbles from housing and UWL-M52 lens
- Thread on UWL-M52 lens fully to seal water between TG housing and UWL-M52 lens
- Check for any possible trapped bubbles
- Roll in and start shooting without burping your lens