DiveVolk SeaLink Underwater WiFi Transmitter
The DiveVolk SeaLink Underwater WiFi Transmitter has been designed to transmit WiFi signal from your smartphone (via the DiveVolk SeaTouch 4 Max Smartphone Housing) to your camera. It allows the user to operate the camera using the smartphone or use the smartphone as a monitor.
Installation Tips:
- Please position the sensor within the screen area of camera housing, if installing with an aluminum housing to isolate the WiFi signal.
- Do not over-bend the wire
- WiFi transmitter needs to be installed on the expansion clamp of the SeaTouch housing.
- Slight delay may be experienced on image transmission when using the Wi-Fi connection (transmission may vary depending on the camera)
- It is highly recommended to complete the pairing and connection of the smartphone and the camera on land before diving.
*This Sealink works with Ikelite Housings and the Seatouch 4 Housing mounted on top.
Read our comprehensive DiveVolk Seatouch 4 review, detailing how unique the underwater housing is and all the available accessories.
Watch our review of the DiveVolk SeaTouch 4 Max
Weight:
2.00 LBS
Dimensions:
2.00
(in)
×
1.00
(in)
×
1.00
(in)
Brand:
Divevolk
- The SeaLinkTM contact-type underwater Wi-Fi signal transmitter
- L Bracket
- I Bracket
- M6 Screw x 4 pieces
- 1/4 Screw x 1 piece
- Gasket x3 pieces
- Quick Start Guide
- EVA POacking case
