Fantasea M16C Vacuum Valve and Vacuum Pump

Compatible with Fantasea's R Housings Only.

The Fantasea M16C Vacuum Valve and Vacuum Pump allows you to draw out air from the housing and confirms that you have a watertight seal for your housing. It would also provide you the peace of mind before and during the dive that your camera is safe inside.

* 2nd generation vacuum valve and pump

Important Notices

• Use of the Fantasea M16C Vacuum Valve and Vacuum Pump must not replace any of the other safety measures conducted in order to ensure a complete watertight seal of the housing before and during the dive. 
• Compatibility information provided above consists of general outlines only. Prior to ordering the Fantasea M16C Vacuum Valve and Vacuum Pump and in order to make sure it is fully compatible with your housing, it is recommended to consult with an authorized Fantasea dealer or to contact Fantasea Line.
• Installation instructions provided in the Fantasea M16C Vacuum Valve instruction manual consist of general guidance which applies to most housings. However, it is best to consult with an authorized Fantasea dealer prior to installing the system inside the housing regarding installation guidelines that are specific to your housing model. 
• When installing the Fantasea M16C Vacuum Valve inside a Fantasea Housing, please visit the Fantasea Line website or contact Fantasea Line for installation instructions.

Related Underwater Gear Categories:

• Fantasea Housings
• Underwater Strobes
• Underwater Photo Gear