Ikelite Remote Optical Slave Converter for DS Strobes
Part #: Ike-4403
Product Overview:
Triggers DS Strobes for Sea & Sea or Nauticam housings with internal fiber-optic flash triggering devices using a fiber optic cable.
Strobe Triggering
Trigger your Ikelite DS-series strobe off any camera or strobe flash. The Optical Slave Converter simply attaches to the strobe's electrical bulkhead in place of a sync cord connector. The enlarged slave window provides approximately 90 degrees field of view for remote triggering. Recommended if wireless slave triggering is your primary application.
Â
The Optical Slave Converter can be extended using the optional 3-foot Extension Cord for creative backlighting in wrecks, caves, and pool studio set-ups. It can also be used above water for studio photography work.
Â
The Optical Slave Converter supports manual exposure modes as set on the attached DS strobe. TTL exposure mode is not supported.
Â
An individual Optical Slave Converter is needed for each strobe. Use of multiple strobes requires one Optical Slave Converter per strobe. The Optical Slave Converter supports DS50, DS51, DS125, DS160 and DS161 strobes.
Â
The included fiber optic port threads onto the front of the Remote Optical Slave Converter for the attachment of and triggering via a fiber optic cord. This Converter is sensitive enough to fire the strobe via fiber optic cable with most camera flashes. It is not recommended for use with LED fiber optic triggers by Nauticam, SEA&SEA, and other manufacturers.
Â
Pre-Flash Auto Detection
The Optical Slave Converter automatically configures itself for compatibility with both pre-flash and non pre-flash camera modes. No setting of small switches or confusion over number of pre-flashes. Simply turn on your strobe and take one picture to configure.
Â
Â
Weight:
1.00 LBS
Dimensions:
4.00
(in)
×
4.00
(in)
×
4.00
(in)
Free Worldwide Shipping:
No
Brand:
Ikelite
