Manual Fiber Optic Transmitter for DL and DLM Underwater Housings
The Ikelite manual fiber optic transmitter is a small, independently sealed device may be used to replace your Ikelite flash bulkhead and provide dependable fiber optic triggering for compatible fiber optic underwater strobes. When utilized with an Ikelite strobes (DS160ii, DS161, or DS230) and High Sensitivity Optical Converter, high frame rate burst shooting is supported on an Ikelite underwater housing.
Two CR2032 lithium single-use or rechargeable batteries (not supplied) power the transmitter. A built-in power saving mode on the transmitter increases battery life, so you can expect about a week's diving from a single battery. It is always advisable to travel with extra batteries.
Housing Compatability
- All Ikelite 200DL Underwater Housings
- All Ikelite 50DL Underwater Housings
- Ikelite 200DLM Underwater Housings with an electrical bulkhead or 1/2-20 threaded accessory port
- Not designed for use with other manufacturers' housings
Strobe Compatability
- Ikelite DS-series strobes combined with Optical Converter
- INON S-2000, D-2000, Z-240, Z-330
- SEA&SEA YS-01, YS-D2, YS-D3, YS-D3 II
- Symbiosis SS-2
- Retra Underwater Flash
* Consistent result were not obtained with the Kraken KR-SO2 strobe.
Hotshoe Compatability
This product is compatible with the manual hotshoes included with the purchase of any 200DL or 50DL underwater housings.
- C1 Manual Hotshoe for Canon, Sony, Olympus, & Panasonic Cameras
- N2 Manual Hotshoe (Right) for Nikon Cameras
- N3 Manual Hotshoe (Left) for Nikon Cameras
Related Underwater Gear Categories:
- Manual Fiber Optic Transmitter
- Battery holder
- Batteries excluded - requires 2 x CR2032 batteries
