USED: Sea & Sea YS-D2 Strobe (Older Version)

Condition: Previously flooded with some corrosion - working state

Sold Out

The Sea & Sea YS-D2 strobe offers unique improvements over the original YS-D1 with features not available on any other underwater strobe. An audible alarm provides TTL and Ready Light confirmations. In addition the rear panel now offers glowing controls for easy to read settings underwater and quick confirmation of what mode you are in.

The design on the rear of the strobe offers improved dials, easy to see glowing controls and an updated settings wheel for manual and TTL exposure control.

New Features (Different than YS-D1):

• Audible Confirmation
• Glowing Control Panel
• New Control Knobs
• Dual Powered Focus Light with Included Red Filters
• Redesigned Battery Compartment
• Updated Wing Nut Fixing Bolt (YS Mount)
• Improved Recycle Time (full): 1.5 seconds with Ni-Mh batteries (YS-D1 is 1.9 sec)

Glowing Rear Control Panel:

The glowing control panel gives you a visual confirmation of TTL and Ready Light functions. It also changes color based on the mode set on the strobe so you always know what mode you are shooting in.

With Pre-Flash               Without Pre-Flash                  DS-TTL                    Slave-TTL, TTL

Full YS-D2 Specifications:

• Guide Number - 32
• Beam Angle - 80° x 80° (100° x 100° with Diffuser 100 or 120° x 120° with Diffuser 120)
• Controls: Mode, Target Light, Light Level
• Indicator: Ready / TTL Lamp
• Color Temp: 5600K
• Battery Life (full flashes) : Ni-Mh 200 Flashes, Alkaline ~150 Flashes
• Recycle Time (full): Ni-Mh Approx 1.5sec, Alkaline Approx 3 sec
• Battery Type: AA x 4
• Depth Rating: 100m / 330ft
• Dimensions (WxHxD): 89 x 133 x 116mm / 3.5 x 5.2 x 4.6 in
• Weight: Approx 623g / 22 oz (without batteries)
• Weight Underwater: Approx 40g / 1.82 oz (with batteries)

Video Review: